Computer Hope

Hi there,

My current laptop model/name - ASUS Rog GL702VT

If my research is correct this laptop has NVME PCLE SSD slot.

I am looking to buy M.2. type SSD.

My question is, what brand (Samsung, Kingston, etc.) should I get? Also, I am not sure if I should take out current HDD (which is slow) and use it as an external drive only.

What are your suggestions?

Regards,
E

the worldwide telecom industry has seen persistent change. From the early broadcast and voice correspondence frameworks to over-the-top (OTT) content, the industry has developed, changed and propelled something other than about some other sort of business.
Telecom organizations should now convey consistent, astounding voice transmissions, mixed media administrations and rapid information moves in multi-gadget and portable situations. Customarily, telcom's have rushed to respond to new improvements and innovative advances, for example, the web and cellphones. In any case, they appear to flounder, particularly in the region of income age, with their most recent test — OTT content suppliers.

I know there are various executables that need constant checking of network/internet. And I don't mind, as long as it doesn't have a noticeable impact on the system's performance. But this one does
I just got this pc about a month ago, it's an Acer Nitro 50n-600 (i7 8700, 16 Gb Ram, Nvidia GTX 1060 6Gb, Win10 Pro). Sure it's not one of the best, but it's not too shabby either, and it's got what I need.
But now thanks to this issue, every program I use has to do a pause on whatever the program is doing just so that annoying process gets done, which takes about 3 to 4 seconds. I know it doesn't sound long, but you can notice it for sure. Especially when I'm playing Left 4 Dead 2, boy! Is it annoying!!! When the pause is over, I am a few meters away from where I was before. Or dead.
What could this be?
Are there any log files I should check?

Thanks guys!

(I hope this is not the 2nd time I post this)
I know there are various executables that need constant checking of network/internet. And I don't mind, as long as it doesn't have a noticeable impact on the system's performance. But this one does
I just got this pc about a month ago, it's an Acer Nitro 50n-600 (i7 8700, 16 Gb Ram, Nvidia GTX 1060 6Gb, Win10 Pro). Sure it's not one of the best, but it's not too shabby either, and it's got what I need.
But now thanks to this issue, every program I use has to do a pause on whatever the program is doing just so that annoying process gets done, which takes about 3 to 4 seconds. I know it doesn't sound long, but you can notice it for sure. Especially when I'm playing Left 4 Dead 2, boy! Is it annoying!!! When the pause is over, I am a few meters away from where I was before. Or dead.
What could this be?
Are there any log files I should check?

Thanks guys!

I know there are various executables that need constant checking of network/internet. And I don't mind, as long as it doesn't have a noticeable impact on the system's performance. But this one does
I just got this pc about a month ago, it's an Acer Nitro 50n-600 (i7 8700, 16 Gb Ram, Nvidia GTX 1060 6Gb, Win10 Pro). Sure it's not one of the best, but it's not too shabby either, and it's got what I need.
But now thanks to this issue, every program I use has to do a pause on whatever the program is doing just so that annoying process gets done, which takes about 3 to 4 seconds. I know it doesn't sound long, but you can notice it for sure. Especially when I'm playing Left 4 Dead 2, boy! Is it annoying!!! When the pause is over, I am a few meters away from where I was before. Or dead.
What could this be?
Are there any log files I should check?

Thanks guys!

I am unable to type in new tab for 1-2 seconds when a new tab is opened in a Chrome incognito mode window. Chrome version: 73.0.3683.103.

I am unable to type in new tab for 1-2 seconds when a new tab is opened in a Chrome incognito mode window. Chrome version: 73.0.3683.103.

Hello,
We have legacy dyno controllers to which we connect, using DOS 4.00.1111 (under Win95)
The connection on the pc "programmer" end is to the 25-pin parallel port, and on the target controller end, to a DB9 connector ...
Presumably, this is serial communication ...
Once the hardware connection is in place, we use the MS-DOS prompt (ver = Windows 95. [Version 4.00.1111]
We then change to a specific directory using the CD command.
Once in the right directory, we use the "setenv" command to set that directory as the source environment ...
Then we type a more specific command ... which is ... "iboots dbase3"
I think this loads a text database file to the controller ...
At this point two-way communication should be in place such that the controller recieves the dbase3 configuration "file"

Our programming pc's have gotten old (also legacy.)
I have loaded a new-old-stock computer with Win95 and the corresponding DOS 4.00.1111 version to recreate the necessary platform.
However, the parallel port does not seem to function.
Once I type the "iboots dbase3" command I am kicked out of DOS - that is, DOS simply closes itself out.
When I repeat the sequence, the same result recurs ...
I wonder if I need to "initialize the LPT for ( serial ? ) communication ?
I am playing around with the DOS    MODE    command in the autoexec.bat file.
No luck so far ...

Does anyone have any ideas ? 

This is a test for topic solved

testing without topic solved

test

test 14

test 15

test 16

Locked instead...