Linux umask command

On Unix-like operating systems, the umask command returns, or sets, the value of the system's file mode creation mask.

This page covers the Linux version of umask.

Description

On Linux and other Unix-like operating systems, new files are created with a default set of permissions. Specifically, a new file's permissions may be restricted in a specific way by applying a permissions "mask" called the umask. The umask command is used to set this mask, or to show you its current value.

Syntax

umask [-S] [mask]

Options

What are permissions, and how do they work?

As you may know, each file on your system has associated with it a set of permissions used to protect files: a file's permissions determine which users may access that file, and what type of access they have to it.

There are three general classes of users:

• The user who owns the file ("User").
• Users belonging to the file's defined ownership group ("Group").
• Everyone else ("Other").

In turn, for each of these classes of user, there are three types of file access:

• The ability to look at the file's contents ("Read").
• The ability to change the file's contents ("Write").
• The ability to run the file's contents as a program on the system ("Execute").

So, for each of the three classes of user, there are three types of access. Taken together, this information makes up the file's permissions.

How are permissions represented?

There are two ways to represent a file's permissions: symbolically (using symbols like "r" for read, "w" for write, and "x" for execute) or with an octal numeric value.

For example, when you list the contents of a directory at the command line using the ls command as follows:

ls -l

you will see (among other information) the file permission information for each file. Here, it is represented symbolically, which looks like the following example:

-rwxr-xr--

There are ten symbols here. The first dash ("-") means that this is a "regular" file, in other words, not a directory (or a device, or any other special kind of file). The remaining nine symbols represent the permissions: rwxr-xr--. These nine symbols are actually three sets of three symbols each, and represent the respective specific permissions, from left to right:

Specifying the file creation mask using symbols

The general symbolic form of a mask is as follows:

[user class symbol(s)][permissions operator][permission symbol(s)][,]...

permission symbol is any combination of r (read), w (write), or x (execute), as described above.

user class symbol may be one or more of the following:

permissions operator may be one of the following:

So, for example, the following umask command:

umask u+w

sets the mask so that when files are created, they have permissions which allow write permission for the user (file owner). The rest of the file's permissions would be unchanged from the operating system default.

Multiple changes can be specified by separating multiple sets of symbolic notation with commas (but not spaces!). For example:

umask u-x,g=r,o+w

This command sets the mask so that when subsequent files are created, they have permissions that:

1. prohibit the execute permission from being set for the file's owner (user), while leaving the rest of the owner permissions unchanged;
2. enable read permission for the group, while prohibiting write and execute permission for the group;
3. enable write permission for others, while leaving the rest of the other permissions unchanged.

Note that if you use the equals operator ("="), any permissions not specified will be specifically prohibited. For example, the command

umask a=

Sets the file creation mask so that new files are inaccessible to everyone.

Specifying the file creation mask using numeric representation

The file creation mask can also be represented numerically, using octal values (the digits from 0 to 7). When using octal numeric representation, certain numbers represent certain permissions, and these numbers are added or subtracted from each other to represent the final, combined permissions value. Specifically, the numbers 1, 2, and 4 represent the following permissions:

These numbers are used because any combination of these three numbers will be unique. The following table illustrates their unique combinations:

For each class of user, one digit can represent their permissions; using the example above, we could represent the symbolic permission of rwxr-xr-- using the three-digit octal number 754. The order of the digits is always the same: User, Group, Other.

The other permission digit

In octal representations of file permissions, there are actually four digits. The three important digits we've discussed are the last three digits. The first digit is a special file permission indicator, and for this discussion can be considered always to be zero. So from here on out, when we discuss file permission 777, it may also be called 0777.

So how does the umask actually work?

The umask masks permissions by restricting them by a certain value.

Essentially, each digit of the umask is "subtracted" from the OS's default value to arrive at the default value you define. It's not really subtraction; technically, the mask is negated (its bitwise compliment is taken) and this value is then applied to the default permissions using a logical AND operation. The result is that the umask tells the operating system which permission bits to "turn off" when it creates a file.

In Linux, the default permissions value is 666 for a regular file, and 777 for a directory. When creating a new file or directory, the kernel takes this default value, "subtracts" the umask value, and gives the new files the resulting permissions.

This table shows how each digit of the umask value affects new file and directory permissions:

So if our umask value is 022, then any new files will, by default, have the permissions 644 (666 - 022). Likewise, any new directories will, by default, be created with the permissions 755 (777 - 022).

Examples

To view your system's current umask value, enter the command:

umask

which returns your system's umask as a four-digit octal number, for example:

0002

Again, the first zero is a special permission digit and can be ignored; for our purposes, 0002 is the same as 002.

To view this as a symbolic representation, use the -S flag:

umask -S

Which returns the same value symbolically, for example:

u=rwx,g=rwx,o=rx

where u stands for user, g stands for group, and o stands for other. This is telling us the So if we create a new file, it has the default permissions 664, which is 666 (the default permissions for files) masked by 002 (our umask value).

Let's test this by creating a new file with the touch command:

touch testfile

And now let's get a directory listing for that file:

ls -l testfile

-rw-rw-r-- 1 myusername myusername 0 Jan 7 14:29 testfile

As expected, the new file has permissions -rw-rw-r--, or 0664: The owner and group may read or write the file, and others may only read it.

Now let's change the umask. To set a umask of 022, use the command:

umask 022

This is the same as running umask 0022; if you specify only three digits, the first digit will be assumed to be zero. Let's verify that the change took place:

umask

0022

And now let's create a new file:

touch testfile2

And now let's view its directory listing, with the first file we created, using the asterisk wildcard ("*") to view all files whose name start with "testfile":

ls -l testfile*

-rw-rw-r-- 1 myusername myusername 0 Jan  7 14:29 testfile
-rw-r--r-- 1 myusername myusername 0 Jan  7 14:39 testfile2

As you can see, testfile2 has the permissions 644.

Here are some other example umask commands:

umask a+r

Sets the mask so that new files allows all users to read them; other permissions will be unchanged from the default.

umask a-x

Sets the mask so that new files will not initially be executable by any user; other default permissions unchanged from defaults.

umask u=rw,go=

Sets the mask so that new files will be readable and writable by the user who owns the file, but may not be executed; group members and others have no permissions to access the file.

umask 777

Make new files inaccessible to everyone - no one can read, write, or execute them.

umask 000

Make new files completely accessible (read, write, and execute) to absolutely everyone. However, this is a bad idea. Don't do this.

Related commands

chmod — Change the permissions of files or directories.
csh — The C shell command interpreter.
ksh — The Korn shell command interpreter.
sh — The Bourne shell command interpreter.